1. Select Individual Chemicals.
Select one or more contaminants of interest in the left box and click the ">>" button to move it to the box on the right.
Select multiple contaminants by holding down the Control key (if the contaminant names are adjacent) or the Select key (if the contaminant names are not adjacent).
To remove a contaminant from the right box, select it and click the "<<" button.
The parameter search will only include contaminants in the right box. You can choose up to 1000 contaminants (the calculator run time will correspond with the number of contaminants selected).
2. Select some or all of the available cancer and noncancer toxicity values from the "Available Values" area.
To choose all values, click the "Select All" button.
Clear all selections with the "Deselect All" button.
3. Click the "Retrieve" button to display results.
4. Review and Download Results.
Separate tables will be created for each toxicity value. Click the "Export Data" button above each table to download the data in separate spreedsheet (.xls) files.
Click "New Search" to start over.
Sources for the data are listed at the bottom of the page.
|